125 просмотров На чтение: 3 мин

Connect the printer to IOS

  • In the Admin panel, select the Sales outlet where the Printer will be configured.
  • In the Admin Panel, go to Settings – Devices, click Add
  • In the “General” block, fill in the following fields: Name of the setting, for example, the printer model;
    • Type – select a printer;
    • Manufacturer / Model – your Printer model;
    • Operating system – IOS;
    • Connection method – choose one method Ethernet/ Bluetooth
  1. 1

Connection by Bluetooth

  • In the “General” block, select the connection method- Bluetooth
  • In the “Connection settings” block:
    • In the Bluetooth field – select your printer (several pieces may be displayed)
  • Click test print
  • After printing successfully, click Add
  1. 2

Connection by Ethernet/Wi-fi

  • In the “General” block, select the connection method – Bluetooth
  • In the section “Connection settings” :
    • In the IP field, enter the IP address of your printer, for example 192.168.0.100.
    • The IP addresses of the printer, router, and devices that will print to it must be on the same subnet.
  • Click test print
  • After printing successfully, click Add
  1. 3

Check template

After successfully setting up the printer, you can customize it for your tasks and design.

  1. 3.1

The main

  • You can choose what to print on the printer –
    • Check only;
    • Check and runners;
    • Only sliders;
    • Labels only;
    • Runners and checks;
  • Select the required size of your printer’s receipt (you can view it on the printer sticker, or view it on the manufacturer’s website)
  1. 3.2

Additionally

  • You can load your logo on the receipt by clicking on the “Load” button (check with the manufacturer for support of logo printing)
  • Also, you can add additional information to the check, such as the name of the company (restaurant, coffee shop), address, Wi-Fi password, by filling in the “Header and Footer” fields.
  • To display the “print parameters, dimensions” block, click the switch opposite the “Advanced settings” field
  1. 3.3

Print options

  • If your printer does not support printing in text / graphic mode, you can change it in the “Print Mode” field
  • If you have selected the text mode of printing, and the receipt is printed in hieroglyphs, then you need to check with the manufacturer whether the printer supports printing in Russian (Cyrillic), and check if the Chinese mode is enabled (screenshot below)

How to make Selftest?

  • Steps to print a page Self Test:
    • Insert paper into the printer.
    • DO NOT turn on the printer, hold down the FEED button on the printer.
    • While holding down the FEED button, press the printer power button as soon as
    • red and blue LEDs are on – release the FEED button.
Проверить включен ли Китайский режим в принтере
  • If you have Chinese mode enabled, you must disable it.
  • Check the character and code page on the printer’s self-test, and change the “Encoding” and “Page Code“, the following values are most often used:
    • CP1251 [Cyrillic] and page code 17, 73;
    • CP866 [Cyrillic] and page code 17, 73.
  1. 3.4

Dimensions

  • You can change the size of the receipt in pixels (for fine adjustment of the print area width)
  • In the “Font size” field, select the required size.
  1. 3.5

Indentation

  • Set check indentation margins (optional) –
    • Scroll from top;
    • Scroll after check;
    • Left indent;
    • Right indent.

Was this post helpful?

Done!


Read more:
Request a call